Maintaining a clean and germ-free carpet is essential for a healthy indoor environment, especially in high-traffic areas. Carpets and rugs can trap dirt, bacteria, and allergens, making regular cleaning and disinfection a necessity. In this guide, we will walk you through the step-by-step process of disinfecting your carpet using Sani-Powder, a powerful hospital-grade disinfectant.

Before applying Sani-Powder, ensure the carpet is properly cleaned. Follow these steps:

Vacuum the carpet thoroughly to remove loose dirt, dust, and debris, ensuring a clean surface for disinfection. Once the carpet is clean and any detergents or chemicals have been extracted, proceed to the next step.

To prepare the disinfectant, follow these instructions:

1. Fill a Pump-Up Sprayer – Use room temperature tap water.
2. Measure the Sani-Powder – Cut open the appropriate number of quart packets.
   Example: 4 packets per gallon of water to achieve 600 ppm hospital-grade HOCL (Hypochlorous Acid).
3. Activate the Solution – Let the mixture sit for 10 minutes before use.
4. Use Within 60 Days – Once activated, the solution remains effective for up to two months.

Now that your disinfectant is ready, it’s time to apply it to your carpet:

1. Pump Up the Sprayer – Adjust the nozzle to create an 8-10 inch spray pattern.
2. Apply Evenly – Spray the Sani-Powder at a rate of 1 gallon per 1000 sq. ft. of carpet.
3. Allow to Dry – The solution will naturally dry on the carpet, leaving behind a disinfected surface.

✅ Note: The application rate remains the same for both lightweight and heavyweight carpets.

Can I use Sani-Powder on all types of carpets?

Yes! Sani-Powder is certified for use on soft surfaces and is safe to use on all types of carpets and fabrics, including leather. It will not discolor or damage the fibers or the fabrics.

How often should I disinfect my carpet?

For residential spaces, every 3-6 months is recommended. In high-traffic areas such as offices or healthcare settings, monthly disinfection may be necessary.

Is Sani-Powder safe to use around pets and children?

Yes, Sani-Powder is safe to use around pets, children and food. It is FDA and USDA approved.

Can I mix Sani-Powder with other cleaning products?

No, Sani-Powder should be mixed only with water to maintain its effectiveness and safety.

How long does it take for the carpet to dry after application?

Depending on humidity and ventilation, the carpet should dry within 2-6 hours. Use fans to speed up the process.

Can I vacuum after disinfecting with Sani-Powder?

Yes you can vacuum as you normally would after the Sani-Powder application dries. However, there is no need to vacuum as Sani-Powder does not leave a residue.