Mr. Eats-It™ Hydrocarbon Microbial Cleaner

banner mr eats-it hydrocarbon microbial cleaner
banner mr eats-it hydrocarbon microbial cleaner

Eco-Friendly Microbial Cleaner for Oil, Fuel, and Grease Removal

Nature’s Way to Clean Up Hydrocarbon Contamination—Safe, Powerful, and Residue-Free

The Natural Power of Microbial Cleaning

Mr. Eats-It™ Hydrocarbon uses naturally occurring, hydrocarbon-eating microbes to digest petroleum products at the molecular level. Once applied and agitated, the microbes penetrate surfaces and consume contaminants, converting them into harmless byproducts—with no residue, no neutralizing, and no environmental risk.

Mr. Eats-It™ Hydrocarbon is an eco-friendly, NSF-certified microbial cleaning solution formulated to break down and eliminate hydrocarbon-based contaminants—including oil, fuel, grease, lubricants, and solvents. Harnessing the same microbial technology used in oil spill cleanups, this powerful solution provides a safe, sustainable way to clean heavily soiled areas without damaging surfaces or leaving behind harmful residues or VOCs.

Why Choose Mr. Eats-It™ Hydrocarbon?

Mr. Eats-It™
Hydrocarbon
Traditional
Degreasers
Microbial Formula
VOC-Free
Biodegradable
Non-Corrosive
⚠️
NSF Certified
Eco-Friendly

Key Features & Benefits

Removes Oil, Fuel, Grease, Solvents & More
Safe for Concrete, Metal, Plastic, Fiberglass, Wood, and Tile
Non-Corrosive & VOC-Free – No Harsh Chemicals
Ideal for Surface Prep Before Sealing, Coating, or Painting
Microbes Continue to Remediate After Rinse
NSF Nonfoods Compounds Certified
Will Not Etch Concrete or Promote Rust

Recommended Applications

Step 2: Mr. Eats-It Hydrocarbon Microbial Cleaning Product was tested on a small area and the results are dramatic.
Cleaning Railroad Pit for Non-Slip Surface Application
Mr. Eats-It Hydrocarbon Microbial Cleaner
Cleaning Oil Soaked Floors in a Repair Shop

🛢️ Oil-Soaked Concrete & Shop Floors

 

🚂 Railroad, Elevator, & Automotive Pits

 

🏗️ Industrial Surface Prep Before Coating

 

💧 Soil and Water Cleanup

 

🛠️ Small Gas or Hydraulic Leaks

 

🔧 Metal & Equipment Degreasing Before Repainting

Frequently Asked Questions (FAQs)

Yes. Mr. Eats-It is eco-friendly and uses biodegradable microbes that pose no harm to water systems when rinsed properly.

Absolutely. Mr. Eats-It leaves no residue and is ideal for surface prep before sealing, staining, or painting.

No. Unlike acid-based or chemical degreasers, it does not require any neutralizer.

  1. Shake Well Before Use – Can be used straight or diluted up to 3:1 with water
  2. Moisten Surface with Water
  3. Apply Product using a pump sprayer or by pouring directly
  4. Agitate Thoroughly with a deck brush or scrubber to activate microbial digestion
  5. Dwell Time
    • 5–10 minutes for daily cleaning
    • 1–2 hours for surface prep
    • Longer dwell for heavy or aged contamination
  6. Rinse Completely with water to drain or extract with wet vacuum

Clean Equipment using warm or cold water—no chemical cleaner needed

Coverage & Storage

  • 📦 Coverage: 200–300 sq ft per gallon (varies by dilution and contamination level)
  • 🧊 Shelf Life: 2 years
  • 🌡️ Storage Temp: 32°F – 120°F

⚠️ Do Not Freeze

The microbes digest and break them down into water and CO₂—no chemical leftovers, no VOCs.

No. It’s non-corrosive and safe on all metal surfaces. In fact, it helps prep metal for repainting by removing oily films.

Safe for All Common Surfaces

Surface Compatibility
Concrete ✅ Safe
Metal ✅ Non-Corrosive
Plastic ✅ Safe
Fiberglass ✅ Safe
Wood & Tile ✅ Safe
Asphalt ✅ No Etching

Start Cleaning Smarter Today.

Mr. Eats-It™ Hydrocarbon is your go-to solution for industrial-grade cleaning that’s gentle on the environment and tough on contamination. Whether you’re prepping for coating, cleaning up spills, or remediating oil-soaked soil—this microbial powerhouse gets the job done safely and effectively.

Order Mr. Eats-It™ Microbial Cleaner Today

Contact Us for Bulk Pricing and Distribution Options